Nedia

I made a Pie model, simple as that.
Includes Alt Textures for Various pies (or you can make one yourself.)
IMAGES:
https://ibb.co/9pxsHMD
https://ibb.co/jTTNMxb
https://ibb.co/gvDLQBr
 
DOWNLOAD

Here's a .schematic for you all of the school I'll use in my Mine-imator series.
 
Download:
http://www.mediafire.com/download/pb4lr4xcr4z9bbz/Mineimator+School.schematic
 
Picture:

Here's a .schematic for you all of the school I'll use in my Mine-imator series.
 
Download:
http://www.mediafire.com/download/pb4lr4xcr4z9bbz/Mineimator+School.schematic
 
Picture:

Here' once again, another movie authentic Rig. I actually shared this rig years ago, but ended up losing it in a hard desk failure. Now, I have remade the rig. It's nothing special, really. I figured I'd share it here anyways.

The mouth opens and closes, so woohoo I guess.

Huge thank to my buddy RigaM0rty over at the fad Universe mod. He was the one that designed the textures, when I first made the model in 2017. I reused the ones he made for me back then, with permission.


The model has no planned release, so don't attack me for putting it in wallpapers. I cannot share my rigs in the rigs section because they do not have downloads. Feel free to take a look at my other models. Not all of them are this generic. Here's a link to one of my best rigs.

This has been my little project over the past week or so. I haven't seen anyone take on the task of making a movie accurate R2-D2 rig, with all of his gadgets so I figured I'd give it my go! He's based specifically off of the original Radio Controlled model seen in A New Hope, hence the black and blue holo-projector in the front and the single silver panel in the back.
Also, yes. This is in work in progress, because you need a download to put it in rigs, and I'm also not sure yet if I want to release him, but I did want to show him around.

So far, he features the following.
-Fully animated (Rotating dome, moving legs, etc)
-All doors open (even ones that don't open in the movies!)
-All gadgets (Minus ones from Clone Wars or his Rocket Boosters. Minecraft flames wouldn't look right!)
-Authentic Light systems (The logic screens are animated, and his light fades out like it's supposed to.)
-Third leg (It wouldn't be Artoo without it.)

His planned accessories are:
-Parascope  (Seen in The Empire Strikes Back when he falls into the swamp)
-Life Form Scanner (Seen in The Empire Strikes Back in the beginning when they wait for Luke)
-Buzz Saw (Used in return of the Jedi, to free the heroes from the net trap)
-Gripper Arm (He uses this arm to fight Yoda over the flashlight)
-CPU Arm (The arm he uses to plug into doors and control panels)
-Taser (In multiple movies, though most noticeably used in Revenge of the Sith, to kill the buzz droid)
-Drink Server (Return of the Jedi, Jabbas Sail Barge)
-Side Arms (I believe he uses these to press a button in A New Hope but I could be mistaken. You should be able to find them in a reference.)

Have a look for yourself!

 

This is a model that was mainly inspired by my recent loss of internet. I lost connection to the digital realm, and had a disc of WALL-E laying around, so I spent 5 hours going through the movie getting high resolution screengrabs for a Mine-Imator Model. Here is a small preview of him. Also in the works, is Eve, and potentially more further down the line. He's packed full of features. Just about everything he does in the movie, this model can accomplish as well. This includes Transforming, Charging in the sun, and more! More to come once he is completely finished.

 
 

Made with Mine-imator 1.0.6, for technical reasons.

Credit if you use

It's the study girl from the ChilledCow lofi radio.
I really wanted to make everything in the scene and wanted to be very accurate as well so this took 4 days >.<
Let me know if you listen to lofi too
Also if you have any recommendations... 

 
Inspiration
 

public class Robot Rig by Daffa the One {
this rig created with mapped texture block
}
for mine imator 1.2.0 or Higher
now with FHINGERSS
Created in Modelbench
Code: {13 5 12 1 14 3 8 9} "this number is alphabet like 1 is A or 2 is B"
Texture Size: 128x
x2048bit sys
          }
       }
      }init (2)"n0t 1nclud3 sw0rd"
<1>end
Download the Rig: >>bOT.ZIP<<
*call me if the rig is error*

Hello! It's been quite a while since I produced a rig, but I decided to end that with this rig, and more rigs to (hopefully) come. Actually, the idea of a trombone rig has been one that I have had for years, so it is nice to finally see it come into fruition. Being a trombone rig, you can expect the slides (both the main and tuning counterparts) to move, which you can see in greater detail in the gallery below. And that's really all to see.

 
 
Now, as mentioned previously, I want to continue producing more rigs. However, for the sake of challenge and fun, I want the rig ideas to be suggested by YOU! Suggest anything that you want. and it might just actually happen. I might make a whole separate topic for rig suggestions, so be on the lookout for that. Anyways, here's the download!

Don't forget to like and comment to support more quality rigs to be produced by me! I'll see you all soon.
(EDIT: Something weird happened with the spoiler. It should hopefully be fixed now.)
 

Hello! It's been quite a while since I produced a rig, but I decided to end that with this rig, and more rigs to (hopefully) come. Actually, the idea of a trombone rig has been one that I have had for years, so it is nice to finally see it come into fruition. Being a trombone rig, you can expect the slides (both the main and tuning counterparts) to move, which you can see in greater detail in the gallery below. And that's really all to see.

 
 
Now, as mentioned previously, I want to continue producing more rigs. However, for the sake of challenge and fun, I want the rig ideas to be suggested by YOU! Suggest anything that you want. and it might just actually happen. I might make a whole separate topic for rig suggestions, so be on the lookout for that. Anyways, here's the download!

Don't forget to like and comment to support more quality rigs to be produced by me! I'll see you all soon.
(EDIT: Something weird happened with the spoiler. It should hopefully be fixed now.)
 

Hello! It's been quite a while since I produced a rig, but I decided to end that with this rig, and more rigs to (hopefully) come. Actually, the idea of a trombone rig has been one that I have had for years, so it is nice to finally see it come into fruition. Being a trombone rig, you can expect the slides (both the main and tuning counterparts) to move, which you can see in greater detail in the gallery below. And that's really all to see.

 
 
Now, as mentioned previously, I want to continue producing more rigs. However, for the sake of challenge and fun, I want the rig ideas to be suggested by YOU! Suggest anything that you want. and it might just actually happen. I might make a whole separate topic for rig suggestions, so be on the lookout for that. Anyways, here's the download!

Don't forget to like and comment to support more quality rigs to be produced by me! I'll see you all soon.
(EDIT: Something weird happened with the spoiler. It should hopefully be fixed now.)
 

Hello! It's been quite a while since I produced a rig, but I decided to end that with this rig, and more rigs to (hopefully) come. Actually, the idea of a trombone rig has been one that I have had for years, so it is nice to finally see it come into fruition. Being a trombone rig, you can expect the slides (both the main and tuning counterparts) to move, which you can see in greater detail in the gallery below. And that's really all to see.

 
 
Now, as mentioned previously, I want to continue producing more rigs. However, for the sake of challenge and fun, I want the rig ideas to be suggested by YOU! Suggest anything that you want. and it might just actually happen. I might make a whole separate topic for rig suggestions, so be on the lookout for that. Anyways, here's the download!

Don't forget to like and comment to support more quality rigs to be produced by me! I'll see you all soon.
(EDIT: Something weird happened with the spoiler. It should hopefully be fixed now.)
 

Hello! It's been quite a while since I produced a rig, but I decided to end that with this rig, and more rigs to (hopefully) come. Actually, the idea of a trombone rig has been one that I have had for years, so it is nice to finally see it come into fruition. Being a trombone rig, you can expect the slides (both the main and tuning counterparts) to move, which you can see in greater detail in the gallery below. And that's really all to see.

 
 
Now, as mentioned previously, I want to continue producing more rigs. However, for the sake of challenge and fun, I want the rig ideas to be suggested by YOU! Suggest anything that you want. and it might just actually happen. I might make a whole separate topic for rig suggestions, so be on the lookout for that. Anyways, here's the download!

Don't forget to like and comment to support more quality rigs to be produced by me! I'll see you all soon.
(EDIT: Something weird happened with the spoiler. It should hopefully be fixed now.)
 

Hello! It's been quite a while since I produced a rig, but I decided to end that with this rig, and more rigs to (hopefully) come. Actually, the idea of a trombone rig has been one that I have had for years, so it is nice to finally see it come into fruition. Being a trombone rig, you can expect the slides (both the main and tuning counterparts) to move, which you can see in greater detail in the gallery below. And that's really all to see.

 
 
Now, as mentioned previously, I want to continue producing more rigs. However, for the sake of challenge and fun, I want the rig ideas to be suggested by YOU! Suggest anything that you want. and it might just actually happen. I might make a whole separate topic for rig suggestions, so be on the lookout for that. Anyways, here's the download!

Don't forget to like and comment to support more quality rigs to be produced by me! I'll see you all soon.
(EDIT: Something weird happened with the spoiler. It should hopefully be fixed now.)
 

Hello! It's been quite a while since I produced a rig, but I decided to end that with this rig, and more rigs to (hopefully) come. Actually, the idea of a trombone rig has been one that I have had for years, so it is nice to finally see it come into fruition. Being a trombone rig, you can expect the slides (both the main and tuning counterparts) to move, which you can see in greater detail in the gallery below. And that's really all to see.

 
 
Now, as mentioned previously, I want to continue producing more rigs. However, for the sake of challenge and fun, I want the rig ideas to be suggested by YOU! Suggest anything that you want. and it might just actually happen. I might make a whole separate topic for rig suggestions, so be on the lookout for that. Anyways, here's the download!

Don't forget to like and comment to support more quality rigs to be produced by me! I'll see you all soon.
(EDIT: Something weird happened with the spoiler. It should hopefully be fixed now.)
 

Hello! It's been quite a while since I produced a rig, but I decided to end that with this rig, and more rigs to (hopefully) come. Actually, the idea of a trombone rig has been one that I have had for years, so it is nice to finally see it come into fruition. Being a trombone rig, you can expect the slides (both the main and tuning counterparts) to move, which you can see in greater detail in the gallery below. And that's really all to see.

 
 
Now, as mentioned previously, I want to continue producing more rigs. However, for the sake of challenge and fun, I want the rig ideas to be suggested by YOU! Suggest anything that you want. and it might just actually happen. I might make a whole separate topic for rig suggestions, so be on the lookout for that. Anyways, here's the download!

Don't forget to like and comment to support more quality rigs to be produced by me! I'll see you all soon.
(EDIT: Something weird happened with the spoiler. It should hopefully be fixed now.)
 

Hey everyone! Presenting the Kitchen Blender Schematic, which is found in this



Download: http://www.mediafire.com/download/yuc5h10aqpti8y3/Blender.schematic

This is honestly the definitive Mine-imator style for me. It goes beyond the blocky style and limitations of the original game, but not too much so that it does still feel like Minecraft, something that I think can be an issue with some of the forums content.
I really like this wallpaper.

Hello, this will be my last wallpaper of 2018, showcasing a farm on a bright day! For this wallpaper, I tried using... unorthodox methods involving the blocks when creating the structures. It's hard to explain, but you'll understand what I mean when you see the actual wallpaper. I'd like some feedback on how I did with that.

As always, feedback in the comments is appreciated, and maybe the wallpaper might actually be modified based on the feedback I receive. Oh, and
Happy New Year!
UPDATE #1
- Adjusted bloom and color correction settings. The wallpaper should appear a bit more bright and colorful now.
- Added a secret...
UPDATE #2
- Adjusted DOF.
 

Hello, this will be my last wallpaper of 2018, showcasing a farm on a bright day! For this wallpaper, I tried using... unorthodox methods involving the blocks when creating the structures. It's hard to explain, but you'll understand what I mean when you see the actual wallpaper. I'd like some feedback on how I did with that.

As always, feedback in the comments is appreciated, and maybe the wallpaper might actually be modified based on the feedback I receive. Oh, and
Happy New Year!
UPDATE #1
- Adjusted bloom and color correction settings. The wallpaper should appear a bit more bright and colorful now.
- Added a secret...
UPDATE #2
- Adjusted DOF.
 

Hello, this will be my last wallpaper of 2018, showcasing a farm on a bright day! For this wallpaper, I tried using... unorthodox methods involving the blocks when creating the structures. It's hard to explain, but you'll understand what I mean when you see the actual wallpaper. I'd like some feedback on how I did with that.

As always, feedback in the comments is appreciated, and maybe the wallpaper might actually be modified based on the feedback I receive. Oh, and
Happy New Year!
UPDATE #1
- Adjusted bloom and color correction settings. The wallpaper should appear a bit more bright and colorful now.
- Added a secret...
UPDATE #2
- Adjusted DOF.
 

Hello, this will be my last wallpaper of 2018, showcasing a farm on a bright day! For this wallpaper, I tried using... unorthodox methods involving the blocks when creating the structures. It's hard to explain, but you'll understand what I mean when you see the actual wallpaper. I'd like some feedback on how I did with that.

As always, feedback in the comments is appreciated, and maybe the wallpaper might actually be modified based on the feedback I receive. Oh, and
Happy New Year!
UPDATE #1
- Adjusted bloom and color correction settings. The wallpaper should appear a bit more bright and colorful now.
- Added a secret...
UPDATE #2
- Adjusted DOF.